8CH 3G SD CCTV Systems
8ch 3g realtime tracking SD card cctv systems with gps wifi for vehicle fleet management
Sodimax SDM628A 8CH 3G/4G GPS SD card vehicle DVR Recorder supporting 8 channel FULL D1 video recording, 3G/4G wirelss live video transmission through PC&phone remotely, with GPS tracking on google map, wifi auto downloading.
*Provide Video output for playing-back mode in main frame.
* Recording format: D1 and CIF
* H. 264 High Profile video compressionl.
* User friendly player software, easy to operation.
* The full recording time and date can be showing in the monitor directly.
* Support from +8V DC to +36VDC. Applicable for vehicles with +12V or +24V battery...
* Auto-run recording after hard disk plug-in and power supplied.
* Support schedule recording.
* Special good anti- vibration performance.
* Provide 1-8 set of alarm input ports.
* Firmware can be upgraded via USB port.
* Support recording audio, video and G-sensor at the same time.
* GPS 3G WIFI Gensor for optional.
Graphics Operation Interface
System parameters can be set through external display and remote controller
2-level management for user password, administrator password, supporting encrypted transmission
Video and Preview
Video Input, Output
8-channel video input, 1channel video output; 1.0Vp-p, 75Ω
Character superposition function, information superposition of time and date, device ID and GPS, etc.
Video Compression Format
Compression coding. Applying Hisilicon hi-performance processor.
Preview of 1-channle, 4-image stitching, supporting full screen triggered by event and switching of stitched images
PAL: 100 frames/s, up to 25 frames/s per channel; NTSC: 120 frames/s, up to 30 frames/s per channel
8CH Full D1, HD1&CIF 8 channel optional
Grade 1 to grade 8 for selection (1 is the best)
CIF: 300Kbps ~ 1.2 Mbps, 8-level bit rates for selection
Audio Input, Output
4-channel input, 1-channel output
Supporting one SD card or 2 SD Card, Space up to 128G, supporting data redundancy storage technology;
File Format/ System
Special file system
Recording at startup by default, supporting timed recording, recording triggered by alarm and event, as well as manual recording
Searching by time, type, storage device and other conditions
Supporting playback on local device, supporting synchronous playback of up to 4 channels and analysis on vehicle information in the files
Supporting fast forward, fast backward, play and pause, supporting fast forward and fast backward at 2x, 4x, 8x and 16x speed, supporting file play from selected time
Alarm Input/ Output
8-channel on/off signal alarm input, 2-channel on/off signal alarm output
duration of recording after alarm can be adjusted from 10s ~ 999S
Storage Space Alarm
Supporting settings for alarm of storage space
GPS overspeed alarm, acceleration alarm, motion detection alarm
485,RS232, RJ45 10M/100M self-adaptable network interface
Supporting 3G/4G wireless transmission
Supporting external GPS
Supporting PTZ control realized by local;
Supporting parameter configuration functions for mobile DVR coding channel;
Supporting SD card upgrading and remote upgrading
Power Supply and Power Consumption
1. ACC on/off
DC:+9V ~ +36V
With patented UPS power supply continuous working technology, it can work for 3~5 seconds after external power supply is cut so that the intactness of video data can be kept upon sudden power failure
<10W in normal operation; <0.5W in standby mode
Normal: 0℃ ~ +60℃; upon hard drive preheating: -25℃ ~ +60℃
10% to 95%
153(L) x148(W) x43(H) mm.
Net: 1.3KG Gross: 2.3KG
1)The server software is free? What are the system requirements to use this software?
Yes, it is free of charge.
For server setup, you need to buy a static IP adress from your local network provider, and then the computer should be with good performance (HDD capacity should be above 500GB, Memory above 4G, CPU above 2G, with dual core, Network interface should be 100 Mega or 1000 mega.
2)What Operating system needs to be used? Windows 7 or 8 or Windows server? Can the WIFI auto download software be placed on the same system?
RE: yes, you could use windows system, 7 or 8 are both okay. Also the wifi auto download software are with the same system. In fact, our current software are all based on windows system.(only Clients is with android system&IOS&windows)
3)When we start using your server and after some time we build our own, can the IP address in the units be changed remote or do we do this by wire?
If you build your own server, then you could change the DVR local settings by manual. After you used your own server, then you could run the server TOOl software, then you could remotely change the settings of your vehicles, this is no problem.
1)How to connect DVR to computer by RJ45 interface net ?
The default RJ45 IP adress of our DVR is :192.168.0.192. a.After turn-on the DVR(HDD should be locked), connect DVR to your computer by net cable through RJ45 port.
b.Set the computer's local IP adress network section the same as this DVR(192.168.0.192) , for example the local IP of computer will be set as 192.168.0.1
c.Open IE by inputting 192.168.0.192,enter, then you will see DVR's login window, please login by account as below:
d.then you could do settings based on manuals we sent.
a.Install harddisk based on our HDD install diagram and lock it.
b.After locking, please do formatting for the HDD by DVR(not by computer)
c.If HDD can not be read, please use USB cable to connect DVR to your computer, then check if your computer could read the HDD, if not, then HDD is broken.。
d.After formatting, the HD-Lamp will be bright, it means the HDD is readable. Please press "INFO" button on remote control to check the HDD's contents.
3)About SMS sending function:
To realize such function, the customer need to do below:
a.Set up a server
b.Buy a GSM Module to work with the server.
When you need to send SMS to specified person, you could set the numbers and rules by your server software. And no matter how many vehicles worked with the server, all of the vehicles could use this GSM module to send SMS, it is easy and more economic.
4)MDVR – how we see it working:
a.When ignition is turn ON start recording.
RE: Yes, there are 3 mode for Record Setup, 1st is ACC type, it means once the ACC is on, the device will start to record. 2nd is Timed type, it means you will need to make a time schedule firstly, then the device will work by your schedule. 3rd is Alarm Record type, it means the device will only start to work when there is alarm.
5)If crash id detected then send 15 seconds before event and 30 second after event over 3G and an alert to customer email / SMS.
RE: In fact, the device can only record the video 15S before alarm happens, but the alert SMS/email will be only sent to the users when the alarm happens.(can not be sent 15s before alarm)
6)If speeding occurs then send 15 seconds before event and 30 second after event over 3G and an alert to customer email / SMS.
Re: Yes, the device will record all the videos 15s before and 30s after event, but the alert SMS/email will be only sent to the users when the alarm happens.
7)When ignition is turned off record for another 15 minutes then power off. Re: Yes, our device supports Delay off by 3min~240mins, so 15 min is no problem.
If you're interested in the 8ch 3g realtime tracking sd card cctv systems with gps wifi for vehicle fleet management, welcome to contact our factory. As one of the professional China manufacturers and suppliers in this field, our company has passed the CE certification. Please be free to get the high-quality solutions and system with us.